upload
Rockwell Automation, Inc.
Industry: Automation
Number of terms: 8432
Number of blossaries: 0
Company Profile:
Rockwell Automation, Inc. provides industrial automation power, control, and information solutions.
A programme or routine, such as an editor or debugger, designed to perform a particular function of general usefulness. Compare to application programme and operating system
Industry:Automation
In binary synchronous communications, this DLE sequence is sent by a receiving station to indicate that it is temporarily not ready to receive.
Industry:Automation
Undesirable fluctuations in motor speed that can occur after a step change in speed reference (either acceleration or deceleration) or load.
Industry:Automation
A hardware interrupt that triggers a single scan execution of a PII programme whenever an interrupt signal is detected at an input circuit of a PLC processor module.
Industry:Automation
An expression for maximum encoder speed in Hz. May also refer to the maximum rate at which the control loop can accept encoder signals. The actual bandwidth of the encoder and the capability of the controller to process encoder signals may not be the same.
Industry:Automation
The power loss in an iron-core transformer or other ac device because of magnetic hysteresis.
Industry:Automation
1) An output that, when turned on, supplies a positive dc current to its load. 2) Contrasted with sink output
Industry:Automation
A programme running under DOS that remains loaded in memory even when it is not running so that it can be quickly be invoked for a specific task performed while any other application programme is operating.
Industry:Automation
In communication protocol, the procedure executed by the network to send a message designated at the application layer. This includes: station processing time, media access, transmission, and turn-around times for both stations until the reply is available at that application layer.
Industry:Automation
Unit space not equipped to accept a future unit (as defined in NEMA Standard Pub. No. ICS 2, 1988).
Industry:Automation