upload
The Petroleum Extension Service
Industry: Education; Oil & gas
Number of terms: 4495
Number of blossaries: 0
Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
the force exerted by a body of fluid at rest. It increases directly with the density and the depth of the fluid and is expressed in many different units, including pounds per square inch or kilopascals.
Industry:Oil & gas
a subsurface, porous, permeable or naturally fractured rock body in which oil or gas are stored. Most reservoir rocks are limestones, dolomites, sandstones, or a combination of these. The four basic types of hydrocarbon reservoirs are oil, volatile oil, dry gas, and gas condensate. An oil reservoir generally contains three fluids—gas, oil, and water—with oil the dominant product. In the typical oil reservoir, these fluids become vertically segregated because of their different densities. Gas, the lightest, occupies the upper part of the reservoir rocks; water, the lower part; and oil, the intermediate section. In addition to its occurrence as a cap or in solution, gas may accumulate independently of the oil; if so, the reservoir is called a gas reservoir. Associated with the gas, in most instances, are salt water and some oil. Volatile oil reservoirs are exceptional in that during early production they are mostly productive of light oil plus gas, but, as depletion occurs, production can become almost totally completely gas. Volatile oils are usually good candidates for pressure maintenance, which can result in increased reserves. In the typical dry gas reservoir natural gas exists only as a gas and production is only gas plus fresh water that condenses from the flow stream reservoir. In a gas condensate reservoir, the hydrocarbons may exist as a gas, but, when brought to the surface, some of the heavier hydrocarbons condense and become a liquid.
Industry:Oil & gas
see cathead.
Industry:Oil & gas
a set of mounted blades used to impart motion to a fluid air or gas (such as, the rotor of a centrifugal pump).
Industry:Oil & gas
see reservoir drive mechanism.
Industry:Oil & gas
see cathead.
Industry:Oil & gas
preventing the passage of fluid. A formation may be porous yet impermeable if there is an absence of connecting passages between the voids within it. See permeability.
Industry:Oil & gas
the process in which reservoir fluids are caused to flow out of the reservoir rock and into a wellbore by natural energy. Gas drive depends on the fact that, as the reservoir is produced, pressure is reduced, allowing the gas to expand and provide the principal driving energy. Water drive reservoirs depend on water and rock expansion to force the hydrocarbons out of the reservoir and into the wellbore. Also called natural drive energy.
Industry:Oil & gas
a hoisting or pulling line powered by the cathead and used to lift heavy equipment on the rig. A structural framework erected near the top of the derrick for lifting material.
Industry:Oil & gas
a block with lead or another relatively soft material on its bottom. It is made up on drill pipe or tubing at the surface, run into a well, and set down on the object that has been lost in the well. The block is retrieved and the impression is examined. The impression is a mirror image of the top of the fish; it also indicates the fish’s position in the hole, for example, whether it is centered or off to one side. From this information, the correct fishing tool may be selected.
Industry:Oil & gas